
The portable helium mass spectrometer leak detector is a high-precision, non-destructive leak detection device that utilizes mass spectrometry principles and helium as the tracer gas. Leveraging helium’s low atmospheric concentration and distinctive mass-to-charge ratio, it achieves ultra-high-sensitivity leak detection and can precisely locate and quantify leak points.
The device supports multiple leak detection modes, including vacuum helium injection, suction probe scanning, and backpressure accumulation, and is suitable for a variety of testing requirements, such as vacuum and pressurized vessels, sealing assemblies, and precision components. It is widely used in the aerospace, semiconductor, automotive, and medical electronics industries, serving as a core piece of equipment for seal testing in high-end manufacturing and precision industries.
Standard desktop enclosure, attractive and practical.
Wide detection range, spanning 10 orders of magnitude.
High-pressure-resistant leak detection ports capable of detecting both large and small leaks.
Full-color LCD touchscreen for easy operation.
One-button reset of leak detection status.
Menu interface available in both Chinese and English.
Detection values can be stored.
The entire unit meets international advanced standards.
| Minimum detectable leak rate | 3×10⁻¹³ Pa·m³/s |
| Leak rate display range | 1×10⁻²—1×10⁻¹³ Pa·m³/s |
| Start-up time | ≤2 min |
| Response time | ≤0.5 s |
| Maximum pressure at the leak test port | 2000 Pa |
| Mechanical pump pumping speed | 0.5 L/s |
| Ultimate vacuum | 5×10⁻⁴ Pa |
| Power requirements | 220 V, 50 Hz, single-phase, 10 A |
| Operating Environment | 0–45°C |
| Relative Humidity | ≤80% |
| Dimensions and Weight | 560 (W) × 420 (D) × 320 (H), 42 kg |